 |
(The following text is from the Kisan
website, I will be posting my review
soon).
BE SAFE! Compared to a typical
automobile, motorcycle stop lamps
are simply too small to attract
immediate attention. This is especially
true for the cruisers because they are
mounted so low to the ground.
tailBlazer overcomes this by rapidly
flashing the taillights the instant you
apply the brakes. The flash rate then
slows down to a steady ON - this cycle
lasts about 4 seconds. This flash
pattern is called a Deceleration
Warning.
Motorcycle Safety Foundation (MSF)
suggests that you pump your brakes
at each stop. tailBlazer does it
automatically, and by flashing both
filaments for a maximum brightness.
tailBlazer Notes
Unique exponential decay flash pattern.
As easy as replacing a bulb.
Programmable taillight intensity.
|
|
|
|
|
This product works! It diffidently gets
the attention of the vehicles following
your bike, as you use your turn signals
and when you use your brakes. This
safety devise also adds to the quality
look of your bike. It can be a big help
if you have changed your original turn
signals for the smaller (and hopefully
brighter) turn signals that are available
from after-market retailers. I feel that
smaller turn signals can get overlooked
when you go to make a turn. With the
LPC-16 installed you supplement your
turn signals with the six sequential
lights that move in the direction of
your left or right turn and give needed
presents to your intention to make a turn.
Even if you are using your original turn
signals, more is better. And because
motorcycles can stop on a dime, cars
following you may not realize that you
can stop so fast. When the Deceleration
Warning Sequence is activated by using
your brakes, the cars following you
see the necessity to stop shorter so
they lessen the possibility of tail-
ending your bike. This product is a
win-win safety device and I highly
recommend it.
(The following text is from the Kisan
website).
v3 in 1 Feature
Sequential Turn Signal
Right and Left LED arrays indicate
sequential turn signals. These
superbright LEDs (8500 mCd) have
a wide viewing angle of 180 degrees.
They are sunlight readable, even
from the adjacent lanes.
Brake Light Modulator
A cluster of (6) LEDs is magnified by
an acrylic lens to broadcast the
Deceleration Warning sequence. As
soon as you tap the brakes, they
modulate rapidly at first then slow
down to a solid ON over a period
of (4) seconds.
Running Lights
This is a programmable feature. For
additional visibility, all LEDs stay ON
at reduced intensity, but you can also
turn this feature Off.
|
|
|
|
|
My 'first look' review will post
soon.
(The following text is from the
The PulseTech website).
The PulseTech® Products Corporation
100X010 XC100-P Xtreme Charge™
is a Five-Stage Maintenance Charger.
Use it for evaluation and testing. A
unique test feature evaluates the
battery thoroughly during the initial
connection to determine the
appropriate charge rate based on its
size and condition. It tests the battery
continually for as long as it is
connected to the charger to maintain
the optimal bulk or float charge rate.
This test step incorporates a
"Bad Battery" indication if it
determines the battery is faulty and
cannot be re-charged. Use Xtreme
Charge for maintenance and bulk
charging. It's designed to be a
maintenance charger for any type of
12-V lead-acid battery. By imposing
only the appropriate amount charge
rate, the battery is maintained safely
at its proper operating voltage
indefinitely. Conversely, if the charger
is connected to a discharged battery,
its bulk charge capability
(2.5 A actual/5 A effective) will
re-charge the battery rapidly and
safely so it can be put back into
service quickly. A proprietary
computer-integrated technology
measures both voltage and current
to determine the appropriate amount
of charge the battery is able to accept
at any given time. As the pulse and
saturation charges improve the
battery's condition, the charge rate
may be increased safely to an optimal
level. This proprietary algorithm
protects the battery from the risk of
damage due to overcharging. The
XC100-P features variable float
charge. PulseTech's intelligent circuitry
imposes the correct amount of charge
rate as determined by the continual
evaluation of the battery's condition.
The charge rate may be as minimal as
0.2 A during typical float up to the full
2.5 A for more deeply discharged
batteries. This variable float charge
ensures optimal charge rate is applied
to the battery. PulseTech's unique and
patented PULSE technology increases
the duty and life cycles of any size or
type of 12-V lead-acid battery by
minimizing the size of the lead
sulfate crystals. This allows a battery
to accept as much charge as possible.
PULSE technology helps ensure that
your new batteries will stay in
like-new condition while older
batteries often improve dramatically.
Duty cycles are typically extended
from three to five times for all types
of lead-acid batteries! Xtreme
Charge is ideally suited for AGM and
maintenance-free batteries (from less
than 10 Ah to over 150 Ah). The
combination of patented pulse
technology and proprietary charging
algorithm typically allows it
to charge these high-performance
batteries more fully. It also maintains
a safe charge profile for traditional
batteries including flooded, fill and
charge and gel. Includes
fuse-protected quick-disconnect
battery clamps and lugs, Important
Safety Instructions and
Quick-Start Guide.
Fuse-protected, spark-proof unit
is UL and CE certified. Five-year
warranty.
|
|
|
|
|
|
|
|
